H3C GB0-371-ENU

As we all know, sometimes the right choice can avoid the waste of time, getting twice the result with half the effort. Especially for GB0-371-ENU preparation materials, only by finding the right ones can you reduce the pressure and help yourself to succeed. If you haven't found the right materials yet, please don't worry. Maybe our GB0-371-ENU practice engine can give you a leg up which is our company's flagship product designed for the GB0-371-ENU exam. No matter which country or region you are in, our GB0-371-ENU can provide you with thoughtful services to help you pass exam successfully. They have many advantages, and next I'll introduce them to you.

Thoughtful online customer service

Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our GB0-371-ENU actual exam. Not only will we fully consider for customers before and during the purchase, but we will also provide you with warm and thoughtful service after payment. We have a special technical customer service staff to solve all kinds of consumers’ problems. If you have questions when installing or using our GB0-371-ENU practice engine, you can always contact our customer service staff via email or online consultation. They will solve your questions about GB0-371-ENU preparation materials with enthusiasm and professionalism, giving you a timely response whenever you contact them.

Carefully written content

In order to ensure the quality of our GB0-371-ENU preparation materials, we specially invited experienced team of experts to write them. The content of our GB0-371-ENU practice engine comes from a careful analysis and summary of previous exam syllabus, so that you can accurately grasp the core test sites. In general, our GB0-371-ENU actual exam has covered all the knowledge that must be mastered in the exam. You just should take the time to study GB0-371-ENU preparation materials seriously, no need to refer to other materials, which can fully save your precious time. To keep up with the changes of the exam syllabus, our GB0-371-ENU practice engine are continually updated to ensure that they can serve you continuously.

Making your learning time-saving and efficient

Generally speaking, preparing for the GB0-371-ENU exam is a very hard and even some suffering process. Because time is limited, sometimes we have to spare time to do other things to review the exam content, which makes the preparation process full of pressure and anxiety. But from the point of view of customers, our GB0-371-ENU actual exam will not let you suffer from this. As mentioned above, our GB0-371-ENU practice engine have been carefully written, each topic is the essence of the content. Only should you spend about 20 - 30 hours to study GB0-371-ENU preparation materials carefully can you take the exam. The rest of time you can go to solve all kinds of things in life, ensuring that you don't delay both study and work.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. In the PIM-DM networking, about the router sending Prune (prune) message, the description is correct.

A) Assert (Assert) The losing party sends Prune to the winning party
B) After the router interface receives the Prune message, it will no longer send packets of the corresponding multicast group on this interface
C) When the outgoing interface list in the router (S, G) entry is empty, it will send a Prune message to the upstream RPF neighbor
D) When the router has no local directly connected multicast receivers, it will send a Prune message to the upstream RPF neighbor
E) After the router RPF interface receives the Prune message, it will no longer receive packets from the corresponding multicast group on this interface

2. As the basis for the realization of the SNMP protocol, the managed objects in the MIB can be identified by the object name or OID. The following descriptions of the managed objects are correct (multiple choice)

A) The nodes in the MIB are divided into leaf nodes and non-leaf nodes. The non-leaf points cannot be accessed
B) Leaf nodes are divided into phenotype nodes and scalar nodes. When the network management workstation accesses the leaf nodes, the instance ID must be added after the leaf node corresponds to the OID.
C) Scalar nodes only have read attributes, not write attributes
D) The managed object exists in the form of a node, which can be represented by object name or OID, and the two are mapped one by one

3. In the networking model shown in the figure, after the configuration is completed, it is found that the user authentication fails, then the possible cause of the failure is

A) The message shared key between RADIUS Server and RADIUs Client is inconsistent
B) The network cable between RADIUS Server and RADIUs Client is not connected
C) No default domain is specified on RADIUSClient
D) The username is not configured on the RADIUSServer

4. The following statements about multicast routing protocols are correct:

A) In dense mode, the multicast data stream is flooded from the multicast source to every corner of the network by pushing, and the multicast receiver passively receives multicast packets
B) The multicast routing protocol has two modes: dense and sparse
C) Intra-domain multicast routing protocols include: MSDP, DVMRP, MOSPF, PIM
D) In sparse mode, the multicast data stream is sent from the multicast source to the multicast receiver in a pull mode, and the multicast receiver actively sends and receives requests

5. The customer's two switches SWA and SWB are connected together through seven Ethernet cables and configured with dynamic link aggregation. The corresponding ports on the switch SWA are Ethernet 1/0/1, Ethernet 1/0/2, and Ethernet 1/0. /3, Ethernet 1/0/4, Ethernet 1/0/5, Ethernet 1/0/6, Ethernet 1/0/7o If the switches SWA and SWB only support 6 ports per aggregation group, and the SWA switch has the following Configuration:
[SWA]interface Ethernet 1/0/7
[SWA-Ethernet1/0/7]lacp port-priority 4096
Check LACP status on the device: output letter: as follows:
[SWA]display lacp system-id
Actor System ID: 0x8000, 00e1-fc00-5000
[SWB]display lacp system-id
Actor System ID: 0x8000, 00e0-fc43-7384
If you change SWA's LACP system priority to 4096, you can know from the above information

A) In the case of the same port configuration, Ethernet1/0/6 port is the Unselected port of the aggregation group
B) When the configuration of each port is the same, the Ethernet1/0/7 port is the Unselected port of the aggregation group
C) When the configuration of each port is the same, SWA randomly selects one port among the six ports Ethem shot 1/0/1 to Ethernet 1/0/6 as the aggregation group UnselectM
D) In the case of the same port configuration, Ethernet1/0/1 port is the aggregation group Unselected

Solutions: