Microsoft 070-582

As we all know, sometimes the right choice can avoid the waste of time, getting twice the result with half the effort. Especially for 070-582 preparation materials, only by finding the right ones can you reduce the pressure and help yourself to succeed. If you haven't found the right materials yet, please don't worry. Maybe our 070-582 practice engine can give you a leg up which is our company's flagship product designed for the 070-582 exam. No matter which country or region you are in, our 070-582 can provide you with thoughtful services to help you pass exam successfully. They have many advantages, and next I'll introduce them to you.

Making your learning time-saving and efficient

Generally speaking, preparing for the 070-582 exam is a very hard and even some suffering process. Because time is limited, sometimes we have to spare time to do other things to review the exam content, which makes the preparation process full of pressure and anxiety. But from the point of view of customers, our 070-582 actual exam will not let you suffer from this. As mentioned above, our 070-582 practice engine have been carefully written, each topic is the essence of the content. Only should you spend about 20 - 30 hours to study 070-582 preparation materials carefully can you take the exam. The rest of time you can go to solve all kinds of things in life, ensuring that you don't delay both study and work.

Thoughtful online customer service

Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our 070-582 actual exam. Not only will we fully consider for customers before and during the purchase, but we will also provide you with warm and thoughtful service after payment. We have a special technical customer service staff to solve all kinds of consumers’ problems. If you have questions when installing or using our 070-582 practice engine, you can always contact our customer service staff via email or online consultation. They will solve your questions about 070-582 preparation materials with enthusiasm and professionalism, giving you a timely response whenever you contact them.

Carefully written content

In order to ensure the quality of our 070-582 preparation materials, we specially invited experienced team of experts to write them. The content of our 070-582 practice engine comes from a careful analysis and summary of previous exam syllabus, so that you can accurately grasp the core test sites. In general, our 070-582 actual exam has covered all the knowledge that must be mastered in the exam. You just should take the time to study 070-582 preparation materials seriously, no need to refer to other materials, which can fully save your precious time. To keep up with the changes of the exam syllabus, our 070-582 practice engine are continually updated to ensure that they can serve you continuously.

Microsoft Windows Embedded Standard 7 for Developers Sample Questions:

1. You are developing a Windows Embedded Standard 7 image by using Image Configuration Editor (ICE). You have an installation file for an application. You need to ensure that the application is deployed automatically when the image is deployed. What should you do?

A) Insert a synchronous command to the answer file to run the installation file.
B) Add a value for the installation file to the HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run registry key.
C) Add the installation file shortcut to the Autostart folder.
D) Create a configuration set based on the answer file.

2. You are deploying a Windows Embedded Standard 7 image on a USB flash device (UFD).
The UFD is formatted by using the FAT file system. You need to ensure that the UFD can be
used to start Windows Embedded Standard 7. What should you do?

A) Use the Diskpart.exe file to format the UFD by using the NTFS file system and mark the UFD as active.
B) Use the bootprep.exe file to mark the UFD as active.
C) Use the BCDEdit.exe file to mark the Boot Configuration Data (BCD) store on the UFD.
D) Use Notepad to edit the boot partition number in the Boot.ini file on the UFD.

3. You are developing a Windows Embedded Standard 7 image for 50 target devices. Each device will use a different type of plug-and-play printer. You need to ensure that the final image contains only the driver for the type of plug-and-play printer attached to the device. What should you do?

A) Add a synchronous command that invokes the DPInst.exe tool during the auditUser pass to install the driver for the plug-and-play printer attached to the device. B.Create
an answer
file
and set Windows
Embedded/PnPCustomizationsWinPE
for the DriverPaths element
to the share location of the driver files.
Run the Sysprep /unattend:"answerfile.xml" command.Restart the device.
B) Create an answer file along with the Windows Embedded/PnPSysprep setting for the PersistAIIDevicelnstalls option set to TRUE. Allow the plug-andplay manager to install the plug-and- play printer driver.Restart the device.
C) Run the Sysprep /audit /reboot command on the image. Install all given plug-and-play printer drivers. Run the Sysprep /generalize/oobe /shutdown command. Capture and deploy the image. Attach the plug-and-play printer to the device before the image is installed to the device.

4. You need to manually deploy a final and resealed Windows Embedded Standard 7 Windows Image (WIM) to a target device. What should you do?

A) Boot WindowsPE and use the lmageX.exe tool to apply the WIM file to an NTFS file system formatted partition on the target device.
B) Boot Image Builder Wizard (IBW) and use the XCopy.exe tool to copy the WIM file to an NTFS file system formatted partition on the target device.
C) Boot Image Builder Wizard (IBW) and use the lmageX.exe tool to apply the WIM file to an ExFAT file system formatted partition on the target device.
D) Boot WindowsPE and use the XCopy.exe tool to copy the WIM file to an ExFAT file system formatted partition on the target device.

5. You are creating a Windows Embedded Standard 7 image for a target device. You plan to use new hardware along with 8 GB of RAM in the target device. The device will run a database application that requires a large amount of physical memory. You need to ensure that the operating system can use all the RAM available in the device. What should you do?

A) Run
the bcdedit.exe /set increaseuserva
3072 command
during the
appropriate configuration pass.
B) Configure the PageFile\Size setting of EmbeddedEdition_x86.
C) Use the Select Distribution Share option to select an x64 distribution share.
D) Use the Select Distribution Share option to select an x86 distribution share.

Solutions: