Microsoft 70-544

Carefully written content

In order to ensure the quality of our 70-544 preparation materials, we specially invited experienced team of experts to write them. The content of our 70-544 practice engine comes from a careful analysis and summary of previous exam syllabus, so that you can accurately grasp the core test sites. In general, our 70-544 actual exam has covered all the knowledge that must be mastered in the exam. You just should take the time to study 70-544 preparation materials seriously, no need to refer to other materials, which can fully save your precious time. To keep up with the changes of the exam syllabus, our 70-544 practice engine are continually updated to ensure that they can serve you continuously.

Making your learning time-saving and efficient

Generally speaking, preparing for the 70-544 exam is a very hard and even some suffering process. Because time is limited, sometimes we have to spare time to do other things to review the exam content, which makes the preparation process full of pressure and anxiety. But from the point of view of customers, our 70-544 actual exam will not let you suffer from this. As mentioned above, our 70-544 practice engine have been carefully written, each topic is the essence of the content. Only should you spend about 20 - 30 hours to study 70-544 preparation materials carefully can you take the exam. The rest of time you can go to solve all kinds of things in life, ensuring that you don't delay both study and work.

Thoughtful online customer service

Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our 70-544 actual exam. Not only will we fully consider for customers before and during the purchase, but we will also provide you with warm and thoughtful service after payment. We have a special technical customer service staff to solve all kinds of consumers’ problems. If you have questions when installing or using our 70-544 practice engine, you can always contact our customer service staff via email or online consultation. They will solve your questions about 70-544 preparation materials with enthusiasm and professionalism, giving you a timely response whenever you contact them.

As we all know, sometimes the right choice can avoid the waste of time, getting twice the result with half the effort. Especially for 70-544 preparation materials, only by finding the right ones can you reduce the pressure and help yourself to succeed. If you haven't found the right materials yet, please don't worry. Maybe our 70-544 practice engine can give you a leg up which is our company's flagship product designed for the 70-544 exam. No matter which country or region you are in, our 70-544 can provide you with thoughtful services to help you pass exam successfully. They have many advantages, and next I'll introduce them to you.

Microsoft TS: Ms Virtual Earth 6.0, Application Development Sample Questions:

1. You are creating a Web application by using the Virtual Earth 6.0 map control.
A Web page of the application provides links to a number of pre-defined locations. The application must meet the following requirements:
The links can be shared.
The links are encoded with map properties.
Users can copy the links to the Windows clipboard.
You need to write code to meet the requirements.
Which code fragment should you use?

A) <address id="Link"
onclick="location.replace(location.protocol+location.pathname+'?40.689167&-
74.04472&16&h');"> Liberty </address>
B) <code id="Link"
onclick="window.open(location.protocol+location.pathname+'?40.689167&-
7 4.04472&16&h');"> Liberty </code>
C) <button id="Link" onclick="location.replace(' http:
//www.mymappingsite.com/mymappage.aspx?40.689167&-74.04472&16&h');"> Liberty
< /button>
D) <a id="Link" href="http: //www.mymappingsite.com/mymappage.aspx?40.689167&-
74.04472&16&h">Liberty</a>

2. You need to display a navigation control that permits the rotation of a three-dimensional
Virtual Earth 6.0 map. Which code segment should you use?

A) function GetMap() { map = new VEMap('myMap'); map.LoadMap(null, null, null, true ,
VEMapMode.Mode3D); map.Hide3DNavigationControl(); }
B) function GetMap() { map = new VEMap('myMap'); map.LoadMap(null, null, null, true ,
VEMapMode.Mode3D); map.Show3DNavigationControl(); }
C) function GetMap() { map = new VEMap('myMap'); map.LoadMap(null, null, null, false ,
VEMapMode.Mode3D); }
D) function GetMap() { map = new VEMap('myMap'); map.LoadMap();
map.SetMapMode(VEMapMode.Mode3D); map.Hide3DNavigationControl(); }
E) function GetMap() { map = new VEMap('myMap'); map.LoadMap();
map.Show3DNavigationControl(); }

3. You are creating a Web application by using the Virtual Earth 6.0 map control. You need to identify the minimum browser software and versions that the application can support.
Which three browser configurations should you use? (Each correct answer presents part of the solution. Choose three.)

A) FireFox 2.0
B) Netscape Navigator 6.0
C) FireFox 0.9
D) Safari 2
E) Microsoft Internet Explorer 5.0
F) Microsoft Internet Explorer 6.0

4. You are creating a Web application by using the Virtual Earth 6.0 map control. A Web page of the application provides navigational aid to the users.
When the Web page loads, it must meet the following requirements:
The map must appear in the two-dimensional mode.
The users must be able to view the roads on the map and navigate through the map.
The users must not be able to change the map to the three-dimensional mode.
You need to ensure that the Web page meets the requirements.
Which code segment should you use?

A) map.LoadMap(new VELatLong(-33.85,18.6), 11,'r', true, VEMapMode.Mode2D, false);
B) map.LoadMap(new VELatLong(-33.85,18.6),11,'r', false, VEMapMode.Mode2D, false);
C) map.LoadMap(new VELatLong(-33.85,18.6),11,'r', true, VEMapMode.Mode2D, true);
D) map.LoadMap(new VELatLong(-33.85,18.6),11,'r', false, VEMapMode.Mode2D, true);

5. Your company wants to display customer locations as pushpins on a Virtual Earth 6.0 map.
You need to ensure that the pushpins are loaded after the Virtual Earth map is loaded.
Which code segment should you use?

A) function GetMap() { map = new VEMap('myMap'); map.LoadMap(new
VELatLong(47.22, -122.44), 12, 'r', false); map.AttachEvent ('onchangeview', function(){...Load the pushpins...}); }
B) function GetMap() { map = new VEMap('myMap'); map.LoadMap(new
VELatLong(47.22, -122.44), 12, 'r', false); map.onLoadMap = function(){...Load the pushpins...}; }
C) function GetMap() { map = new VEMap('myMap'); map.LoadMap(new
VELatLong(47.22, -122.44), 12, 'r', false); map.AttachEvent ('oninitmode', function(){...Load the pushpins...}); }
D) function GetMap() { map = new VEMap('myMap'); map.onLoadMap =
function(){...Load the pushpins...}; map.LoadMap(new VELatLong(47.22, -122.44), 12, 'r', false); }

Solutions: