IBM A4040-121

Thoughtful online customer service

Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our A4040-121 actual exam. Not only will we fully consider for customers before and during the purchase, but we will also provide you with warm and thoughtful service after payment. We have a special technical customer service staff to solve all kinds of consumers’ problems. If you have questions when installing or using our A4040-121 practice engine, you can always contact our customer service staff via email or online consultation. They will solve your questions about A4040-121 preparation materials with enthusiasm and professionalism, giving you a timely response whenever you contact them.

As we all know, sometimes the right choice can avoid the waste of time, getting twice the result with half the effort. Especially for A4040-121 preparation materials, only by finding the right ones can you reduce the pressure and help yourself to succeed. If you haven't found the right materials yet, please don't worry. Maybe our A4040-121 practice engine can give you a leg up which is our company's flagship product designed for the A4040-121 exam. No matter which country or region you are in, our A4040-121 can provide you with thoughtful services to help you pass exam successfully. They have many advantages, and next I'll introduce them to you.

Carefully written content

In order to ensure the quality of our A4040-121 preparation materials, we specially invited experienced team of experts to write them. The content of our A4040-121 practice engine comes from a careful analysis and summary of previous exam syllabus, so that you can accurately grasp the core test sites. In general, our A4040-121 actual exam has covered all the knowledge that must be mastered in the exam. You just should take the time to study A4040-121 preparation materials seriously, no need to refer to other materials, which can fully save your precious time. To keep up with the changes of the exam syllabus, our A4040-121 practice engine are continually updated to ensure that they can serve you continuously.

Making your learning time-saving and efficient

Generally speaking, preparing for the A4040-121 exam is a very hard and even some suffering process. Because time is limited, sometimes we have to spare time to do other things to review the exam content, which makes the preparation process full of pressure and anxiety. But from the point of view of customers, our A4040-121 actual exam will not let you suffer from this. As mentioned above, our A4040-121 practice engine have been carefully written, each topic is the essence of the content. Only should you spend about 20 - 30 hours to study A4040-121 preparation materials carefully can you take the exam. The rest of time you can go to solve all kinds of things in life, ensuring that you don't delay both study and work.

IBM Assessment: Virtualization Technical Support for IBM i -v1 Sample Questions:

1. Which of the following is true for the IBM System Planning Tool (SPT)?

A) SPT can be integrated with IBM i Performance Tools to assist with the sizing of new servers.
B) Any system plan can be exported as a configuration file (.CFR) and then imported into the Hardware Management Console or Integrated Virtualization Manager.
C) SPT can be used to design new partitions or validate the addition of new hardware in existing partitions.
D) Cable and DIMM sizes can be specified to improve implementation efficiency.

2. An administrator is planning to update a POWER blade server managed with Integrated Virtualization Manager (IVM) from version 1.5 to version 2.2
What should the administrator take into consideration?

A) All client partitions should be shut down before starting the migration to avoid data corruption.
B) The partition profile data will need to be saved before the migration and restored once the migration is complete.
C) The administrator should use the Advanced Management Module (AMM) interface to specify the location of the migration DV
D) The migration can only occur using a Serial Over LAN (SOL) console.

3. A customer is implementing a new POWER7 system that will run along with an older POWER5 system.
A new HMC has been purchased for the POWER7 system.
The older 7310-CR3 HMC for the POWER5 system will remain in service.
The customer wants the older 7310-CR3 provide back up to the new HMC.
What must be done prior to implementing the customer's requirements?

A) Consult the HMC / Firmware Supported Combinations chart to obtain the proper firmware/HMC
code levelsimplementthe firmware updates on the POWER5 and 7310-CR3 HMC first,
Connectthe 7310-CR3 to the POWER7 system.
B) Connect the new HMC to the POWER7 system and to the LAN.
Use the "Transmit Service Information"dialog on the new HMC to update the 7310-CR3 with the
new HMC code and firmware for the FSP.
Update the firmware on the POWER5 system and connect the new HMC.
C) Upgrade the POWER5 system firmware to the same fix pack level that the POWER7 system is
running. Upgrade the 7310-CR3 to the latest version of HMC code.
Connect both systems normally to the 7310-CR3
D) Ensurethe POWER7 ESP is running in "Dual Mode"with the"Activated Level"setto supportthe
POWER7 system and the "Deferred Level"set to support the POWER5 system.
Connect the 731 O-CR3 with the "Deferred Level"password.

4. An administrator plans to use Live Partition Mobility on their two Power 740 systems. What is required for this environment?

A) VPM
B) VIOS
C) IVM
D) AMM

5. A customer has a Power Systems server which has its FSP directly connected to the HMC on port HMC1. They want to be able to access the ASMI via their desks rather than through the HMC interface. What method will allow this to occur?

A) Attach a serial-to-Ethernet converter to the appropriate port on the rear of the CE Connect and configure the Ethernet cable on the HM
B) Manually configure an accessible static IP address to the ESP's second Ethernet port, HMC2, attach the port to the network, and use the new address from the workstations.
C) Re-run the "Add Managed System" wizard to configure both internal and external access.
D) Configure ASMI pass through on the HMC using a non-standard port. Create a shortcut to the HMC's IP address using that port.

Solutions: